結構組成：

Structural composition:

主要由噴淋頭、液壓泵、水箱、水泵、清洗液箱和控制系統等部分組成。噴淋頭通過噴嘴將清洗液噴射到待清洗物體表面；液壓泵負責將水轉化為高壓水；水箱儲存水；水泵負責將水輸送到清洗系統中；清洗液箱儲存清洗液；控制系統則負責對整個清洗過程進行控制和調節。

It mainly consists of sprinkler head, hydraulic pump, water tank, water pump, cleaning solution tank, and control system. The spray head sprays cleaning solution onto the surface of the object to be cleaned through a nozzle; The hydraulic pump is responsible for converting water into high-pressure water; Water storage tank for storing water; The water pump is responsible for delivering water to the cleaning system; Storage of cleaning solution in the cleaning solution tank; The control system is responsible for controlling and regulating the entire cleaning process.

工作原理：

working principle:

設備通過噴淋清洗段、噴淋漂洗段、風切吹水段、烘干段等組成一條連續生產線。操作者將要清洗的工件放置在專門設計的進料端上，設備采用左進右出的輸送方式，通過傳輸帶將工件依次送往各工序段進行清洗、漂洗、切水和烘干等處理。整個清洗過程由PLC全自動控制，速度可調，確保清洗后的工件無油、無污物、干燥且無明顯水跡。

The equipment forms a continuous production line through spray cleaning section, spray rinsing section, wind cutting and water blowing section, drying section, etc. The operator places the workpiece to be cleaned on a specially designed feeding end, and the equipment adopts a left in and right out conveying method. The workpiece is sequentially sent to each process section through a conveyor belt for cleaning, rinsing, water cutting, and drying. The entire cleaning process is fully controlled by PLC with adjustable speed, ensuring that the cleaned workpiece is free of oil, dirt, dry, and has no obvious water stains.

使用方法：

usage method:

將待清洗物料放入槽體內，啟動滾筒使物料在槽體內進行滾動運動。同時啟動噴淋系統，通過噴嘴將清洗液均勻噴射到物料表面進行清洗。清洗完成后，物料經過排水裝置排出槽體，并進行后續處理（如烘干等）。在使用過程中，可根據實際需要調整噴淋強度、角度等參數以達到最佳清洗效果。

Place the material to be cleaned into the tank and start the drum to make the material roll in the tank. Simultaneously activate the spray system and evenly spray the cleaning solution onto the surface of the material through the nozzle for cleaning. After cleaning, the material is discharged from the tank through a drainage device and undergoes subsequent processing (such as drying). During use, parameters such as spray intensity and angle can be adjusted according to actual needs to achieve the best cleaning effect.

注意事項：

matters needing attention:

在使用前需檢查設備各部件是否完好無損并處于正常工作狀態；在使用過程中應注意安全操作規范并避免手部或其他身體部位接觸到高速旋轉的部件或高溫的清洗液；使用后應及時清理設備并關閉電源以確保設備長期穩定運行。

Before use, it is necessary to check whether all components of the equipment are intact and in normal working condition; During use, attention should be paid to safe operating procedures and hands or other body parts should be avoided from coming into contact with high-speed rotating components or high-temperature cleaning solutions; After use, the equipment should be cleaned promptly and the power should be turned off to ensure long-term stable operation.

本文由CNC高壓清洗機友情奉獻.更多有關的知識請點擊:http://www.xingyimei.net 真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This article is a friendly contribution from CNC high-pressure cleaning machine. For more related knowledge, please click: http://www.xingyimei.net Sincere attitude. We provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Please stay tuned