多槽手動超聲波清洗機是相對于單槽超聲波清洗機而言的。清洗槽的數量和具體功能因清洗物件和清洗工藝而不同，通常是將多道超聲波清洗與其它清洗方式高壓噴淋清洗、噴氣噴流清洗、熱浸泡清洗、鼓泡清洗等清洗方式組合。下面小編就對多槽手動超聲波清洗機常見的幾種清洗組合及功能作簡單介紹。

Multi tank manual ultrasonic cleaner is relative to single tank ultrasonic cleaner. The number and specific functions of the cleaning tank vary depending on the cleaning objects and cleaning process. Usually, the multi-channel ultrasonic cleaning is combined with other cleaning methods such as high-pressure spray cleaning, jet cleaning, hot soak cleaning, bubble cleaning, etc. The following section briefly introduces several common cleaning combinations and functions of the multi tank manual ultrasonic cleaning machine.

1，雙槽超聲波清洗機：該類型清洗機和單槽機一樣是常見的超聲波清洗設備家族成員，常用于散熱器、不銹鋼制品、電鍍工藝品、儀器儀表、機械零部件、液壓件、電鍍模具等工件的清洗，具體工藝中雙槽超聲波設備一般有以下種組合方式：

1. Double tank ultrasonic cleaning machine: This type of cleaning machine is a member of the common ultrasonic cleaning equipment family, just like the single tank machine. It is commonly used for cleaning radiators, stainless steel products, electroplating handicrafts, instruments, mechanical parts, hydraulic parts, electroplating molds and other workpieces. In the specific process, the double tank ultrasonic equipment generally has the following combinations:

超聲波粗洗槽和超聲波精洗槽，超聲波清洗槽和超聲波漂洗槽，超聲波清洗槽和清水漂洗槽，超聲波電解清洗槽和除銹槽等。其中，超聲波清洗槽和清水漂洗槽組合模式其清洗精度和單槽超聲波清洗機一樣，適用于對清洗精度有一定要求但要求又不是太高的清洗。

Ultrasonic rough cleaning tank and ultrasonic fine cleaning tank, ultrasonic cleaning tank and ultrasonic rinsing tank, ultrasonic cleaning tank and clean water rinsing tank, ultrasonic electrolytic cleaning tank and rust removal tank, etc. Among them, the combined mode of ultrasonic cleaning tank and clean water rinsing tank has the same cleaning accuracy as the single tank ultrasonic cleaning machine, which is suitable for cleaning with certain requirements for cleaning accuracy but not too high.

對于清洗潔度和精度要求很高的清洗一般選用超聲波粗洗槽和超聲波精洗槽的組合模式或更多清洗槽的設備，通常先用低頻率段振幅大去污力強的超聲清洗機進行超聲波粗洗，再用較高頻率段的清洗機進行高潔度清洗。

For cleaning with high requirements on cleanliness and precision, the combination mode of ultrasonic rough cleaning tank and ultrasonic fine cleaning tank or equipment with more cleaning tanks are generally selected. Generally, ultrasonic rough cleaning is performed with ultrasonic cleaning machine with large amplitude in low frequency range and strong decontamination force, and then high cleanliness cleaning is performed with cleaning machine in high frequency range.

2，三槽超聲波清洗機：該類超聲清洗設備通常是在雙槽超聲波清洗系統上加上熱風烘干、慢拉風干等干燥系統，比雙槽超聲波多一個烘干槽，也有部分三槽清洗機設備為超聲波粗洗和超聲精洗外加超聲漂洗槽組成。

2. Three tank ultrasonic cleaning machine: This type of ultrasonic cleaning equipment is usually a double tank ultrasonic cleaning system with hot air drying, slow pull air drying and other drying systems, which is more than the double tank ultrasonic drying tank. Some three tank cleaning equipment is composed of ultrasonic rough cleaning, ultrasonic fine cleaning and ultrasonic rinsing tank.

3，四槽超聲波清洗機：該類超聲清洗機通常由超聲波粗洗槽、超聲精洗槽、超聲漂洗槽和干燥槽四個清洗槽組成。四槽機適用于電子零件、電子儀器、PCB線路板、機械零部件、儀器儀表殼和五金電鍍件等的清洗。

3. Four tank ultrasonic cleaning machine: This type of ultrasonic cleaning machine is usually composed of four cleaning tanks: ultrasonic rough cleaning tank, ultrasonic fine cleaning tank, ultrasonic rinsing tank and drying tank. The four slot machine is applicable to the cleaning of electronic parts, electronic instruments, PCB circuit boards, mechanical parts, instrument shells and hardware electroplating parts.

4，五槽超聲波清洗機：五槽清洗機設備通常是在兩道或三道超聲清洗工藝和干燥系統上加上高壓噴淋清洗或浸泡清洗（熱水浸泡或冷水浸泡）或蒸汽清洗，鼓泡清洗等。

4. Five tank ultrasonic cleaning machine: The five tank ultrasonic cleaning machine is usually equipped with two or three ultrasonic cleaning processes and drying systems plus high-pressure spray cleaning or immersion cleaning (hot water immersion or cold water immersion), steam cleaning, bubble cleaning, etc.

5，六槽、七槽和更多清洗槽超聲波清洗機：因具體清洗工藝而不同，通常由以下幾個清洗槽部分或全部組成：高壓噴淋槽、鼓泡清洗槽、鼓氣清洗槽、超聲粗洗槽、超聲精洗槽、超聲漂洗槽、超聲除油除銹槽、熱水或冷水浸泡槽、酸洗槽、市水漂洗槽、純水漂洗槽、蒸汽清洗槽、切風槽、熱風干燥槽、噴油槽和冷卻槽等。

5. Ultrasonic cleaning machine for six, seven and more cleaning tanks: depending on the specific cleaning process, it usually consists of the following cleaning tanks in part or in whole: high-pressure spray tank, bubble cleaning tank, air blowing cleaning tank, ultrasonic rough cleaning tank, ultrasonic fine cleaning tank, ultrasonic rinsing tank, ultrasonic oil and rust removal tank, hot or cold water immersion tank, acid cleaning tank, municipal water rinsing tank, pure water rinsing tank, steam cleaning tank, wind cutting tank, hot air drying tank Injection tank and cooling tank, etc.

多槽手動超聲波清洗機常見的幾種清洗組合及功能就講解到這里了，從這五點中希望能夠給您好的幫助！如果您還有什么不明白的事項要咨詢了解，歡迎來我們網站www.xingyimei.net進行了解！

This is the end of several common cleaning combinations and functions of the multi slot manual ultrasonic cleaner. I hope to give you some help from these five points! If you still have something you don't understand, please come to our website www.xingyimei.net to learn!