歡迎訪問濟南科爾超聲波設備有限公司網站！

專注生產工業用超聲波清洗機

讓工業清洗無難事

業務咨詢電話：

18663767799

你所在位置：首頁-新聞動態-新聞資訊

新聞資訊

CNC高壓清洗機安全操作十三點

作者：admin來源：http://www.xingyimei.net/時間：2022-11-03

CNC高壓清洗機雖然說效率高效果高，對工作有很好的幫助，但不可以忘記的是該設備存在危險性，要做好安全正確的操作。下面來講解十三點：

Although the CNC high-pressure cleaning machine is said to be highly efficient and effective, which is very helpful to the work, it should not be forgotten that the equipment is dangerous and should be operated safely and correctly. Now let's explain the thirteen points:

1.使用CNC高壓清洗機前，須穿戴好防護用品（含護目鏡）。

1. Before using the CNC high-pressure washer, wear protective equipment (including goggles).

2.嚴禁將清洗噴槍指向人、動物、電器設備。

2. It is forbidden to point the cleaning gun at people, animals and electrical equipment.

3.嚴禁使用CNC高壓清洗機進行沖洗衣物、鞋、交通工具等與工作內容無關的操作。

3. It is forbidden to use CNC high-pressure washer to wash clothes, shoes, transportation tools and other operations unrelated to the work content.

4.CNC高壓清洗機嚴禁離人使用，避免設備處于無人監控狀態。

4. CNC high-pressure cleaning machine is strictly prohibited to be used without people to avoid the equipment being in an unattended state.

5.嚴禁將清洗噴槍指向有害物質,避免有害物質飛濺傷人。

5. It is strictly prohibited to point the cleaning spray gun at harmful substances to avoid injuries caused by splashing of harmful substances.

6.嚴禁在CNC高壓清洗機工作時移動CNC高壓清洗機，移動CNC高壓清洗機時須在主電源斷電后或控制面板主開關切換到“停”的位置后進行。

6. It is forbidden to move the CNC high-pressure washer when it is working. Moving the CNC high-pressure washer must be carried out after the main power supply is cut off or the main switch of the control panel is switched to the "stop" position.

7.使用CNC高壓清洗機時須確保地面干燥、平坦，防止不正確的移動、CNC高壓清洗機翻倒以及CNC高壓清洗機漏電傷人，同時須確保旋轉輪閘已被剎住。

7. When using the CNC high-pressure washer, ensure that the ground is dry and flat to prevent incorrect movement, overturning of the CNC high-pressure washer and electric leakage of the CNC high-pressure washer from injuring people, and ensure that the rotary wheel brake has been braked.
CNC高壓清洗機

8.使用CNC高壓清洗機時雙手須緊握高壓清洗槍，防止扣動清洗噴槍扣機和沖洗時，高壓反沖力導致的清洗噴槍脫手或清洗噴槍失控等不安全情況的發生。

8. When using the CNC high-pressure cleaning machine, both hands must hold the high-pressure cleaning gun tightly to prevent unsafe situations such as the release of the cleaning gun or the out of control of the cleaning gun caused by the high-pressure recoil force when the cleaning gun is buckled and washed.

9.CNC高壓清洗機停止使用時，控制面板主開關切須切換到“停”的位置并且斷開主電源。

9. When the CNC high-pressure washer is stopped, the main switch of the control panel must be switched to the "stop" position and the main power supply must be disconnected.

10.CNC高壓清洗機的清潔及維護工作須在CNC高壓清洗機完全冷卻，并且斷開主電源后進行。

10. The cleaning and maintenance of the CNC high-pressure washer must be carried out after the CNC high-pressure washer is completely cooled and the main power supply is disconnected.

11.進行清洗時嚴禁用清洗噴槍上的安全鎖定扭將清洗噴槍扣機鎖定在打開位置。

11. During cleaning, it is strictly prohibited to lock the cleaning spray gun buckle in the open position with the safety locking knob on the cleaning spray gun.

12.當扣動清洗噴槍扣機無水噴出時，嚴禁人員湊近清洗噴槍進行處理。

12. When the cleaning gun is buckled and the machine is buckled, no one is allowed to approach the cleaning gun for treatment.

13.CNC高壓清洗機壓力設定或調整時須在釋放清洗噴槍扣機后緩慢逐步進行。

13. The pressure setting or adjustment of CNC high-pressure washer must be carried out slowly and step by step after releasing the cleaning gun.

CNC高壓清洗機安全操作就講解到這里了，您對此有什么不了解的事兒就來我們網站www.xingyimei.net咨詢看看吧！

That's all for the safe operation of the CNC high-pressure washer. If you don't know anything about it, please come to our website www.xingyimei.net for consultation!

上一篇：多槽手動超聲波清洗機常見的幾種清洗組合及功能
下一篇：高壓去毛刺清洗機可清洗汽車零件