Introduction to the characteristics of high-pressure water deburring

　　高壓水去毛刺可以在電化學上結合毛刺技術，同時去除毛刺部位銳角銳邊鈍化、圓形和復雜部位的毛刺。可以在去毛刺之前提前清洗，去毛刺清洗和沖洗，循環結束后可以吹風和干燥。這樣就去除了預洗和后洗過程，節省了投資，減少了循環時間。高壓水去毛刺可見技術用于高精度和清潔標準的復雜金屬零件。可以處理各種外觀和材料的零件，以滿足重要的和批量生產要求。高壓水毛刺機在研究和設計理念上可以滿足汽車、農業、船舶、航空航天等廣泛的產業應用。高壓水去毛刺清洗機將部件發送到毛刺工程前，應提前清洗部件上下表面、內外，去除明顯的油污，去除大量碎屑。將部件發送到毛刺工程進行毛刺處理。高壓水去毛刺機預清洗和清除毛刺，使用ECM將毛刺與高壓水射流切割系統相結合，安裝在設備自動作業系統中，設備就可以實現全自動作業。　高壓水去毛刺的應用1.生產效率高，一般來說，一個工件的全部毛刺可以在10秒內全部去除，可以輕松地進行多項平行加工，加工生產率不受加工質量的直接限制，一般適合大批量零件加工。2.加工面積稍大，加工面寬的拐角工件。中心設計復雜，各系統均采用自動化設備，適合大規模生產。設備投資比較高，占地面積大。電化學液對設備、工作服無腐蝕作用，電化學液體環境無污染。

　　High pressure water deburring can be combined with deburring technology electrochemically to remove sharp edges and blunt edges, as well as burrs in circular and complex areas. It can be cleaned in advance before deburring, cleaned and rinsed after deburring, and can be blown and dried after the cycle is over. This eliminates the pre washing and post washing processes, saves investment, and reduces cycle time. High pressure water deburring visible technology is used for complex metal parts with high precision and cleaning standards. Can handle parts of various appearances and materials to meet important and mass production requirements. The high-pressure water deburring machine can meet a wide range of industrial applications such as automobiles, agriculture, ships, aerospace, etc. in terms of research and design concepts. Before sending the components to the deburring project, the high-pressure water deburring cleaning machine should clean the upper and lower surfaces, inside and outside of the components in advance, remove obvious oil stains, and remove a large amount of debris. Send the components to the deburring project for deburring treatment. The high-pressure water deburring machine is used for pre cleaning and deburring, and ECM is used to combine the deburring with the high-pressure water jet cutting system. When installed in the equipment's automatic operation system, the equipment can achieve fully automatic operation. Application of high-pressure water deburring: 1. High production efficiency. Generally speaking, all burrs on a workpiece can be removed within 10 seconds, making it easy to perform multiple parallel processing. The processing productivity is not directly limited by the processing quality, and it is generally suitable for large-scale part processing. 2. Processing corner workpieces with slightly larger processing area and wider processing surface. The center design is complex, and each system uses automated equipment, suitable for large-scale production. The equipment investment is relatively high and occupies a large area. Electrochemical liquids have no corrosive effect on equipment and work clothes, and the electrochemical liquid environment is pollution-free.

　　本文由 高壓去毛刺清洗機  友情奉獻.更多有關的知識請點擊  http://www.xingyimei.net/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a high-pressure deburring cleaning machine For more related knowledge, please click http://www.xingyimei.net/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.